Product Details:
Payment & Shipping Terms:
|
Waveform: | Pure Sine Wave | Output Power Factor: | 0.8 |
---|---|---|---|
Phase: | Single Phase | Protection: | Over Load/Current/Voltage, Short Circuit Etc |
Display: | Digital LCD Display | H.S. Code: | 8504402000 |
High Light: | solar power storage systems,hybrid solar power system |
Solar Tower Online UPS Power with PV Input and inbuilt Mppt Controller 1-3Kva
Model: Solar PV Online UPS Bright Star Series 1K-3Kva ( 1ph in / 1ph out )
Working Principle
1: PV Charges DC CAP with its maximum power and DC-DC booster work with +/- 390Vdc, if load power
is bigger than PV power, the DC CAP voltage will drop and DC-DC booster output voltage will decrease
too, AC-DC booster works with +/-360Vdc, thus it will share the load power automatically between PV
AC. So the DC CAP voltage will reach to a stable value. Battery SCR Q1 stops if line voltage is normal
2: If PV power is bigger than load power, MPPT charger autoatically charges the battery. MPPT charger
works in fload voltage mode, MPPT mode if battery voltage and DC CAP Voltage are high.
3: If AC loose, stop AC-DC booster, switch on batter SCR Q1, make battery and PV works together to
power for the load.
4: If both PV and AC not there, battery works to power the load as the last option.
Absolute advantages
1: No affexted by nation power regulartion policy
2: Ouput voltage is stable. Zero transfer time between line mode and battery mode.
3: Battery works in normal situation, not frequently discharged and the life time is extended max long.
4: UPS works even in very low AC voltage when PV is also in picture together sharing the load.
Technical Specification
Model |
B1K |
B2K |
B3K |
|
Rating |
1KVA/800W |
2KVA/1600W |
3KVA/2400W |
|
Input |
Rated Voltage |
220V/230V/240Vac |
||
Phase |
Single Phase with ground |
|||
Frequency |
50Hz(60Hz) |
|||
Power Factor |
0.99 |
|||
Generator |
Support generator input |
|||
Rated Current |
5A |
10A |
15A |
|
Input Thdi |
≤10% |
|||
Protection |
10A AC fuse |
20A AC fuse |
30A AC fuse |
|
Output |
Rated Voltage |
220/230/240Vac |
||
Voltage Range |
200VAC/208VA/220VAC/230VAC/240VAC |
|||
Voltage Regulation |
±2% |
|||
Frequency |
50HZ(60Hz) |
|||
Overload |
Overload Warning Only |
105%±5%<Load |
||
50s, then transfer to Bypass and alarm |
105%±5%<Load≤125%±5% |
|||
25s, then transfer to bypass and alarm |
125%±5%< Load ≤150%±5% |
|||
300ms, then transfer to bypass and alarm |
Load > 150%±5%, |
|||
Battery |
Rated Voltage |
24VDC |
48VDC |
72VDC |
PV Charger |
Charging Method |
2 staged: fast carge (MPPT), floating charge |
||
Input Working Voltage Range |
30V-150V |
60V-150V |
90V-150V |
|
Max Input DC Voltage |
160V |
|||
Max PV Power |
50S, then return to rated power (105%±5%<PV Power≤125%±5%) |
|||
25S, then return to rated power (125%±5%<PV Power≤150%) |
||||
1S, then return to rated power (PV Power >150%) |
||||
Rated charging current |
50A |
50A |
33A |
|
Rated charging power |
1600W |
2400W |
2400W |
|
Overcharge protection |
30V±1V |
60V±2V |
90V±2V |
|
Conversion Efficiency |
>90% |
|||
PV Modules Utilization Rate |
>98% |
|||
Floating voltage charging |
27.5V |
55V |
82.5V |
|
Thermal method |
Intelligent forced air cooling |
|||
Over temperature protection |
85℃ |
|||
Automatic Retransfer |
Yes |
|||
Transfer Time |
0ms |
|||
Short Protection |
Cut off output within 4 cycles |
|||
Communication |
RS232 Interface |
|||
Monitor Software |
Appending with UPS |
|||
Environment |
Working temperatures |
0℃~40℃ |
||
Altitude |
<1000m |
|||
Audible noise |
≤45db |
|||
Storage temperature |
15℃ ~ 45℃ |
|||
Working humidity |
20%~95% |
|||
Dimension (mm) |
335x186x325 |
425x186x325 |
||
Weight (Kg) |
10 |
11 |
12 |
|
Standard |
||||
Ems |
ESD |
IEC61000-4-2 Level IV |
||
RS |
IEC 61000-4-3 Level III |
|||
EFT |
IEC61000-4-4 Level IV |
|||
Surge |
IEC61000-4-5 Level IV |
|||
Emi |
Conducted |
EN55022 Class A |
||
Radiated |
EN55022 Class A |
|||
Safety |
GB4943-2001/IEC62040-1 |
|||
Transportation |
Drop test |
GB-T4857-18 |
||
Vibration test |
B-WR1-129(GB-T14715-93) |
Competitive Advantages:
1: Three Years' warranty for pure sinewave inverter, and 1% free UPS or 2% free PCB Boards
3: Good after-sales service, we will be full responsible for any faults caused by our side
4: Professional experience in power field more than 10 years
5: Professional technical support before and after sales
6: Timely response, fast delivery time and flexible operations to satisfy any customers' special requests.
7: Free OEM & ODM Service
8: Competitive price, quality and mature products
Contact Person: Mr. fov
Tel: 18810166789
Fax: 86-189-4289-0330
5 Years Warranty MN11-1 Mini Circuit Breaker With Soonest Delivery
6-32a Mini Circuit Breaker DPN Type MCB For Household Installation
Terminal 3P Mini Circuit Breaker For Pin / Fork Busbar Connection 6A 10A
22KA Moulded Case Residential Circuit Breaker , Miniature Circuit Breakers
Electrical Moulded Case Circuit Breakers Automotive , Commercial Circuit Breaker
MCCB Moulded Case 3 Pole Circuit Breakers Low Voltage , Industrial Circuit Breakers
Low Voltage 6A - 63A Residual Current Circuit Breaker With Compact Design
Residual Current Circuit Breaker With Own Design And Steady Market
Residual Current Circuit Breaker Low Voltage 6A - 63A With Compact Design