Payment & Shipping Terms:
|Product Name:||Hydraulic Power Unit||Different Pressure:||Available|
|Flow Rate:||Available||Usage:||Hydraulic Equipment|
|Motor Operate:||With Electrical Machine/pump||Power:||Hydraulic Oil|
|OEM:||Accept||Motor Flange Shape:||Square And Rhombus Flange|
|Motor Volt:||380v AC|
hydraulic power pack unit,
portable hydraulic power pack
Jinle AC Hydraulic Power Unit For Dock Leveler With Customization Service
|Power Units For Dock Leveler 1||YBZ-E2.1B4E10/2||380VAC||0.75KW||2.1mL/r||16MPa||5L|
|Power Units For Dock Leveler 2||YBZ-E2.1B4E71/1||380VAC||0.75KW||2.1mL/r||16MPa||5L|
|Power Units For Dock Leveler 3||YBZ-E2.1B4E80/1||380VAC||0.75KW||2.1mL/r||16MPa||6L|
|Power Units For Dock Leveler 4||YBZ-E2.1A4E81/1||380VAC||0.75KW||2.1mL/r||16MPa||3.5L||457|
|Power Units For Dock Leveler 5||YBZ-E2.1B4E82/1||380VAC||0.75KW||2.1mL/r||16MPa||6L|
|Power Units For Dock Leveler 6||YBZ-E2.1B4E84/1||380VAC||0.75KW||1450RPM||2.1mL/r||13MPa||8MPa|
This hydraulic power pack integrates gear pump, AC motor, multifuctional manifold, cartridge A normally open solenoid valve makes the ramp and lip float with the carriage during loading and unloading, which also offers an emergency stop function while falling.
1. The power unit is of S3 duty, which can only be worked intermittently, ie., 1minute on and 9 minutes off.
2. Clean all the hydraulic parts concerned before mounting the power unit.
3. Viscosity of the hydraulic oil shoud be 15~68 cst, which should also be clean and free of impurities, N46 hydraulic oil is recommended.
4. Check the oil level in the tank after the intial operation of the power unit.
5. Oil Changing is required after the initial 100 operation hours, afterwards once 3000 hours.
A hydraulic power unit can be equipped with a single motor pump, or multiple devices each with their own
accumulator valve. With a multiple pump system, usually only one operates at a time.
The tank is a storage unit designed with enough volume for the fluid in the pipes to drain into it. Likewise,
fluid may sometimes need draining into the tank.
A filter is typically installed along the top of the tank. It is a selfcontained bypass unit, with its own motor, pump,
and filtering apparatus.
It can be used to fill or empty the tank by activating a multi-directional valve. Because they are self-contained, filters can often be replaced while the power unit is
Coolers and Heaters:
As part of the temperature regulation process, an air cooler can be installed near or behind the filter unit
to prevent temperatures from rising above operational parameters. Likewise, a heating system, such as an
oil-based heater, can be used to elevate temperatures when necessary.
Power Unit Controllers:
The hydraulic controller unit is the operator interface containing power switches, displays, and monitoring
features. It is necessary for installing and integrating a power unit into a hydraulic systems, and can usually
be found wired into the power unit.
For customization, please tell me the following specifications:
single action or double action
with or without pressure holding
Single oil cylinder or multiple oil cylinder
gear pump displacement mL/r
flow rate L/min
oil tank capacity
vertical or horizontal
square or round
voltage of solenoid valve
5 Years Warranty MN11-1 Mini Circuit Breaker With Soonest Delivery
6-32a Mini Circuit Breaker DPN Type MCB For Household Installation
Terminal 3P Mini Circuit Breaker For Pin / Fork Busbar Connection 6A 10A
22KA Moulded Case Residential Circuit Breaker , Miniature Circuit Breakers
Electrical Moulded Case Circuit Breakers Automotive , Commercial Circuit Breaker
MCCB Moulded Case 3 Pole Circuit Breakers Low Voltage , Industrial Circuit Breakers
Low Voltage 6A - 63A Residual Current Circuit Breaker With Compact Design
Residual Current Circuit Breaker With Own Design And Steady Market
Residual Current Circuit Breaker Low Voltage 6A - 63A With Compact Design