Payment & Shipping Terms:
Customized Printing LED Waterproof Membrane Switch With Touch Panel
toughened glass panel, PC base
110 - 250V AC,50-60hz
Load power: 700w / gang
Work temperature : - 20 ° C - 70 ° C
Mechanical Life:100,000 on - off times
Panel size : 80 * 80 mm or 86 * 86 mm available
Capability allowance : - 15 % ~ + 10 %
Base : 3different bases, 86 * 86 mm round base , 86 * 86 mmsquare base,or 80 * 80 mm round base
1. test shows that our switch can work well even under 97% humidity
2. strong anti-interference ability,test shows that our switch still work well under 100% interference conditions
3. Good antistatic performance,test shows that our switch can work well under 30KV high voltage static electricity conditions
4. product itself low power consumption 0.02W
Packaging & Delivery
Customized Printing Waterproof Membrane Touch Switch
1. Membrane Overlay Microwave
2. 3M adhesive
3. 100% QC
4. UV resistance
Overlay Materials: The most commonly used base materials are polyester and polycarbonate.
Rear Adhesive: 3M 467MP, 3M 468MP, etc.
Standard Tolerances: +/-.010 inch.
Matching color: Pantone and RAL color matching system.
· Storage Temperature: -40°C (-40°F) to +70°C (158°F).
· Storage Altitude: Sea level to 35,000 feet.
· Operating Temperature and Altitude: -30°C (-30°F) to +75°C (170°F). Can be designed to operate in most environments.
· Humidity: No delamination after 24 hours at 80°C and 90%RH.
-30°C to 80°C
-40°C to 90°C
20%RH ~ 90%RH
10%RH ~ 90%RH
No noted size common