Payment & Shipping Terms:
L2 residual current circuit breaker
1.Application scope ofL2 residual current circuit breaker↓
L2-63 Residual Current Circuit Breaker provide the function of isolation switching and earth leakage protection of electrical circuits.And also provide the indirect protection of the electric current and provide the protection of the fire caused by the electrical circuit fault.
1.In compliance with IEC/EN60898-1.
2.Bilateral busbar wiring capalilities to adapt tothe wider use of permises.
3.Leading in electronic driven,more cost-effectively.
4.Maximum connecting ability of 25mm²,wiring torque 3Nm,applicable to a variety of installing equipments,wiring stronger.
2.Technical Data ofL2 residual current circuit breaker↓
|Rated current in||A||16 25 40 63 80 100|
|Rated voltage Ue||V||230/400|
|Insulation coltage Ui||V||500|
|Rated residual making and breaking capacity Im||A||0.03 0.1 0.3|
|Rated impulse withstand voltage (1.2/50)Uipm||V||6000|
|Dielectric test voltage at and ind.Freq.for 1min||KV||2.5|
|Break time under In||S||≤0.1|
|Fault current indicator||Yes|
|Protection degree||IP 20|
|Reference temperature of setting of thermal element||°C||30|
|Ambient temperature(with daily average≤35°C)||°C||-5~+40|
|Installation||Terminal connection type||Cable/U-type busbar/Pin-type busbar|
|Terminal size top/bottom for cable|
|Terminal size top/bottom for busbar||mm²|
OnDIN rail FN 60715(35mm)
by means of fast clip device